Gesipa FireFox F, Operating Instructions Manual

Page: 18 / 168

18
GB
3.1 How to change a threaded mandrel
• Disconnect the blind rivet nut setting tool from the compressed air network.
• Detach locknut A, using double open-end spanner SW27.
• Unscrew nosepiece B with locknut A.
• Push slide H back all the way to buffer and hold tight.
• Unscrew threaded mandrel C.
• Insert new threaded mandrel of same size (if worn out) or threaded mandrel of matching thread
size all the way to buffer.
• Release slide. At the same time make sure that the threaded mandrel is locked safely inside the
hexagon socket of the slide. If required, unscrew threaded mandrel slightly until the slide locks.
• Insert a matching nosepiece for each thread size using locknut A and lock loosely with locknut,
using a double open-ended spanner.
• Set threaded mandrel length “X”, as described under item 3.2.
3. Starting procedure
Prior to operating the blind rivet nut setting tool, attach the relevant threaded mandrel with
nosepiece to match the thread size.
2.5 Equipment / accessories
FireFox
®
1 FireFox
®
2
Threaded man-
drels
M3, M4, M5 und M6 M4, M5, M6 und M8
Nosepiece M3, M4, M5 und M6 M4, M5, M6 und M8
Tool
Hexagon screw driver SW3
2 x double open-end spanner SW24/27
Suspension loop Extendable from device top
Hydraulic oil
1 bottle of hydraulic oil 100ml (Part no. 1445294)
1 oil filling container (Part no. 1625612)
Other
2 cards for quick setting (quick setting
card part no. 1 colour code
part no. 1436396)
2 cards for quick setting (quick setting
card part no. 1 colour code part
no. 1451098)