安裝說明
Installation Instructions
P.7
產品結構
Product Structure
P.6
爐頭蓋
Burner Cap
燃氣接頭
Gas Inlet Joint
爐頭蓋
Burner Cap
燃氣接頭
Gas Inlet Joint
爐架
Burner Rack
爐架
Burner Rack
爐碟
Drip Pan
爐碟
Drip Pan
爐頭-S
Burner Head-S
爐頭-S
Burner Head-S
爐頭-H
Burner Head-H
爐頭-H
Burner Head-H
旋鈕
Knob
旋鈕
Knob
電池盒(爐底部)
Battery Box
(bottom of unit)
電池盒(爐底部)
Battery Box
(bottom of unit)
點火針
Sparker
爐頭圈
Burner Ring
爐頭圈
Burner Ring
點火針
Sparker
安全感應頭
Flame Sensor
安全感應頭
Flame Sensor
玻璃面板
Glass Panel
玻璃面板
Glass Panel
爐身
Body
爐身
Body
Attention
The gas cooking range must be installed by
registered gas installer. Otherwise, German Pool
will not be responsible for any damages.
- The inlet gas supply working pressure to the
appliance MUST BE as follows:
Type of gas
Inlet pressure
Hong Kong TG
1.5kPa
Hong Kong LPG
2.9kPa
- Pressure MUST BE ACCURATELY MEASURED
before the appliance is connected.
- If non-compatible pressures are connected to
the appliance, it will affect the performance of
the unit and/or pose risk of damage.
- Prior to installation, ensure that the appliance
is adjustable according to the local distribution
conditions (nature of the gas and gas pressure).
- This appliance is not connected to evacuation
devices for combustion products. It shall be
installed according to the relevant regulations.
Particular attention shall be given to the
ventilation requirements.
- Install the built-in hob in a well ventilated room
and keep it away from any combustible or
inflammable objects such as paper or oil.
- Place the built-in hob on a stable and level
surface.
- If the unit is to be installed close to combustible
surroundings (such as wooden walls, wooden
shelves), it should be installed at least 15 cm
(6”) from the side walls. The unit should be
installed with a distance of at least 15 cm away
from surrounding combustible materials.
- Distance from bottom should be at least
25.4 mm (1”).
- This appliance does not need to be installed
with an external gas governor.
- Aeration is preset at factory. Please do not
attempt to adjust it.
注意
所有爐具必須由註冊氣體裝置技工安裝，
切勿自行安裝，否則一切後果本公司概不負
責。
- 本爐具認可的進氣運作氣壓:
氣體類型
進氣氣壓
香港煤氣
1.5kPa
香港石油氣
2.9kPa
- 安裝人員必須於安裝前準確量度氣壓才
可進行接駁。
- 如接駁之氣壓與本爐具所標示的不相符，
將會嚴重影響本爐具運作以及導致損壞。
- 安裝前必須確保煮食爐具可因應當地供
氣情況(氣體類別及壓力)進行調校。
- 本煮食爐沒有接駁至燃燒產品撤離裝置，
應按照有關條例安裝並應特別注意空氣
流通之有關要求。
- 爐具須安裝在空氣流通房間內，附近不
可放置易燃物品如紙張、油類等。
- 爐具須放置在穩固之平面上。
- 如要安裝爐具於易燃物料附近(如木牆、
木架)，兩側須距離15厘米(6英吋)以上，
此爐具的安裝位置應與周圍易燃物料距
離15厘米以上。
- 距離底部不少於25.4毫米(1英吋)。
- 此爐具不需要安裝外置氣體穩壓器。
- 生產商已調校好風位，切勿嘗試自行調校。
GP12-2M-LG, GP12-2M-TG
GP12-3-LG, GP12-3-TG
