4
Figure 2. Principle Features of the PQS-202 Mk II
DDD driver
DDD support
pillars
Sub woofer
driver
Input terminals &
high frequency
adjustment
Top plate
Mid plate
To unpack the loudspeakers please follow the instructions below:
1. Unscrew and remove the two screw caps on each side of the carton top cover – item A in figure 1.
2. Remove the carton top cover by carefully pulling it over the four screws.
3. Remove the foam packing piece from the top of the main body of the carton - item B in figure 1.
4. Unscrew and remove the two screw caps on each side of the carton lower tray – item C in figure 1.
5. Lift off the main body of the carton – item B in figure 1. Make sure that you have sufficient clearance
between the top of the carton and the ceiling above. This may be folded flat for easy storage.
6. Lift the loudspeaker off the lower packing tray by holding it around the cabinet or top plate. Do not lift
the loudspeaker by the DDD driver support pillars.
7. Remove any clear film from around the loudspeaker taking care not to scratch the finish. Do
not
use
a knife.
Please confirm that the cartons contain the following items:
Item
Quantity
Description
1
2
PQS-202 Mk II Loudspeakers
2
1
PQS-202 Mk II User Manual
3
2
Cleaning Cloths
If any items are missing, or show signs of damage, please contact the supplying dealer immediately.
Please retain all of the packing as you will need this should it be necessary in the future to ship the
loudspeakers. The use of any other packing may result in the loudspeakers sustaining damage in
transit. Such damage is not covered by the warranty. Should you require replacement packing, please
contact your German Physiks dealer, the national distributor or the factory directly.
3. PRINCIPLE FEATURES OF THE PQS-202 Mk II
