background image

 

 

12 

 

 

 

8.   CARE OF YOUR LOUDSPEAKERS 

 

NOTE: 

NEVER  attempt  to  open  the  cabinets.  There  are  no  user 
serviceable parts inside the loudspeakers. 

 
 

NEVER touch the diaphragms on the DDD drivers, or allow 
any object to come into contact with the diaphragms.   

 
 

Never  attempt  to  clean  dust  off  the  diaphragms.    Dust  has 
no affect on their performance and may be safely ignored. 

 

 

NEVER attempt to clean the loudspeakers with any abrasive 
materials  or  any  cleaners  containing  ammonia,  alcohol  or 
other solvents,

 

as these may damage the finish. 

 
The only maintenance the loudspeakers will require is periodic dusting to remove dust and any finger 
prints from the cabinets.  Please use the cleaning cloths supplied with the loudspeakers.  These cloths 
should be used dry.  Do not use any liquid with them.  Additional cloths may be obtained via your local 
German Physiks dealer, national distributor or direct from German Physiks. 
 

 

9.   WARRANTY 

 

These  German  Physiks  loudspeakers  are  warranted  to  be  free  from  defects  if  used  under  normal 
conditions for a period of 5 years from the date of purchase, provided that the customer registers their 
purchase by completing and returning the registration form at the end of this manual within 7 days of 
purchase.  A  copy  of  the  receipt  issued  at  the  time  of  purchase  must  also  be  returned.    If  this  is  not 
done the warranty period will be 5 years from the date of shipment from the factory.  This warranty is 
transferable to subsequent owners, who must register their purchase with us.   

Modifications or repairs performed by the factory, or by an authorised repair agent, shall be guaranteed 
for the remaining period of the warranty, or for 1 year, which ever is greater. 

Any  unauthorised  modifications  or  repairs  will  invalidate  the  warranty.   The  warranty  will  also  be 
invalidated  if  German  Physiks  determines  that  the  loudspeakers  have  been  subject  to  misuse 
including,  but  not  limited  to,  burnt  out  voice  coils  and  dents  or  scratches  on  driver  diaphragms  or 
cabinets. 

There  is  no  other  express  warranty  on  German  Physiks  products.   This  warranty  shall  not  extend 
beyond  the  stated  warranty  period.   No  responsibility  is  assumed  for  incidental  or  consequential 
damage. 
 
 

10.  SERVICE AND SUPPORT 

 

 

In the first instance please contact your local German Physiks dealer or distributor. They will diagnose 
the fault and liaise with German Physiks to decide the best way to affect a repair. If they are unable to 
assist you, please contact German Physiks by phone on + 49 61 09 50 29 823, by fax on + 49 61 09 
50 29 826, or by email at [email protected]. You can also contact us via our web site at 
www.german-physiks.com.    Please  take  into  account  time  differences  between  Germany  and  where 
you  are  calling  from  should  you  need  to  phone  us.    Email  is  our  preferred  method  of  initial  contact.  
Please  supply  the  model  name  and  serial  numbers  of  your  loudspeakers  and  as  much  information 
about the problem as possible.  The serial number is printed on a label attached to the underside of the 
base plate. 
 

Summary of Contents for PQS-202 Mk II
















Reviews: