background image

 

 

12 

 
 
 
For items returned to the factory under warranty during the first year, German Physiks will pay for the 
shipping charges both ways.  A shipping company approved by German Physiks must be used and the 
items will be returned to the customer using the same carrier, or an equivalent service. 
 
For loudspeakers returned to the factory under warranty after the first year, the customer is responsible 
for  paying  all  shipping  and  related  charges  back  to  the  factory.  A shipping  company  approved  by  
German  Physiks must  be  used.   Providing  this  condition  is  met, German  Physiks  will  pay the  cost  of 
shipping the loudspeakers back to the customer. 
 
German Physiks will not pay any shipping costs if: 
 

a. Loudspeakers or parts are returned without a RA number  
b. No fault is found 
c. If the fault is judged to be due to misuse such as, but not limited to, burnt out voice   
    coils and dents or scratches on driver diaphragms or cabinets.   
 

Customers  are  responsible  for  all  freight,  duties  and  related  shipping  charges  for  loudspeakers 
returned for non-warranty repairs. 

 

 

12.  HOW TO CONTACT US 

 

If you wish to get in touch with us please use the contact information shown below.  Please note that 
our  office  hours  are  from  9.30  a.m.  to  5.00  p.m.  Monday  to  Thursday,  excluding  public  holidays  and 
that we cannot respond to enquiries outside of these hours.  We recommend that where ever possible 
you contact us by email, as this will allow us to give your enquiry more consideration and thus provide 
a more detailed reply. 
 

Address 

 

DDD-Manufactur GmbH

 

Gutenbergstraße 4

 

D-63477 Maintal 
GERMANY 

Telephone 

 

+ 49 61 09  50 29 823 

Fax 

 

+ 49 61 09  50 29 826 

Email 

 

[email protected] 

Web 

 

www.german-physiks.com 

 

 

 
 
 
 
 
 
 
 
 

 

 

 

 

 

 

 

Summary of Contents for PQS-100 Plus















Reviews: