Gerber HS750 Plus, User Manual

Page: 68 / 94

62 HS750
plus
Troubleshooting Guide
This chart of symptoms is designed to help identify the possible
problem and the probable adjustment procedure.
CAUTION: Turn off the GRAPHIX ADVANTAGE and the
HS750
plus
plotter before checking connections or attempting
to make any adjustments, unless otherwise directed.
Symptom Recommended Procedure
No power Check power cable and plugs, check
ON/OFF switches, and check the fuse.
Poor performance Do routine cleaning and lubrication.
Plotter error Press RESET button. Verify and resend
the job.
Inconsistent tool/
material contact Clean spindle bore and tool holder.
Change knife blade. Check for proper Z
home. Perform Z adjustment for tool
height.
Jagged or serrated
cutting edges Replace the knife. Check for proper
theta home. If improper, perform theta
adjustment.
Replacing Boards
If you need to change a board because of repair or update, refer
to the diagram on the next page when you talk to Gerber Field
Service. Follow the procedures to access the boards.
To access the logic and control boards
CAUTION: Do not attempt to access the logic and control
boards without first contacting Gerber Field Service at 800-
828-5406 for assistance.