Gerber HS750 Plus, User Manual

Page: 18 / 94

12 HS750
plus
Connecting the R908 Keyboard Cable
There are two connections at the end of the R908 cable. Each
cable is marked with a number 1 on its top side when connected
to P908. The expanded diagram on the previous page shows this
connection.
1. Locate the R908 cable.
2. With the numbers facing up toward you, insert the cables into
P908. The smaller of the two cables inserts into the pins on
the right side of P908. The larger cable inserts into the left
side of P908.
Installing the R907 Retaining Clip
The retaining clip secures the R907 plug to the motherboard. The
retaining clip is packaged in the small components box.
1. Remove the retaining clip from the small components box.
2. Locate the R907 plug in the diagram on the previous page.
3. Position the retaining clip over the R907 plug and snap into
place, securing the R907 plug to the mother board.
R907
snap into place