Gerber HS750 Plus, User Manual

Page: 62 / 94

56 HS750
plus
Z WAY BAR/Y LEAD SCREW/THETA WAY BAR/FRONT GUIDE BAR
!
Use a lint-free cloth to wipe any dust or debris from the Z way
bar, the Y lead screw, the theta way bar, and the front guide
bar. Move the carriage to gain access to the entire length of
these shafts.
!
Look for any vinyl pieces adhering to these parts. Use
isopropyl alcohol to clean excessively dirty parts.
!
Lubricate the Z way bar, the theta way bar, and the front guide
bar immediately after cleaning to prevent corrosion. Apply a
light oil (such as
3-IN-ONE
) with a lint-free cloth.
!
Use a small amount of silicon spray on the Y lead screw by
spraying the silicon on a lint-free cloth and wiping the Y lead
screw.
Do not spray directly on the Y lead screw.