Instructions for Use
Ergostik Blueflow
Serial no.: xx|8|201|yyy and 2203xxxxx
Version: 6 | Release date: 02 August 2022
Page 41
3.3
Operation / Servicing and Maintenance
Danger to life.
Reason: Electric shock. Explosion. Device damage.
Unpredictable movement of metal parts.
For this: Comply with the required installation and
operating conditions! Therefore:
•
In principle, observe chap. 12
“Technical Specifications"!
•
Do not operate Ergostik Blueflow if there are
flammable or explosive gases in the room!
•
Do not operate Ergostik Blueflow near the
magnetic field of an MRT system!
Possible danger to life.
Reason: Electrical shock. Cross-contamination or
measurement error. For this: Ensure that the used
components are undamaged and that you are working
in a careful way! Therefore:
•
Ensure that the used components are
undamaged and that you are working in a careful
way!
•
Do not use consumable articles with a limited life
span after their use-by date has been expired!
•
Prior to each use, visually inspect the total system
(housing, cables, connectors, tubings, pneumatic
connections, etc.) for any damages!
•
If there are any damages, do not operate the
system! The damaged parts must be replaced or
repaired properly!
•
Calibrate Ergostik Blueflow at the intervals stated!