Instructions for Use
Spirostik Complete
Serial no.: xx|8|102|yyy and 2103xxxxx
Version: 7
| Release date: 14. July 2021
Page 57
7.6
Removing the Flow Sensor
Possible danger to life.
Reason: Cross-contamination. Contamination with
transferable germs during improper disposal. For this:
Observe the general medical principles! Therefore:
•
Do not use single use products more than once!
•
Dispose single use items (disposable flow sensors
and noseclips) after each use. For this observe
the applicable regulatory requirements for
biologically hazardous materials!
•
Clean and disinfect Spirostik Complete and its
reusable components as instructed by the
manufacturer at regular intervals as specified!
The combination of single use flow sensors and noseclips offers
the highest degree of patient safety from cross contamination
only if all contaminated parts are replaced and disposed of after
the examination.
Proceed as follows to remove:
1.
Unlock the handle.
For this:
Bend the locking device [1] slightly
open by pressure from below.
2.
Remove the flow sensor [2] from the
handle.
(towards the mouthpiece side)
3.
Dispose of flow sensor.
4.
Insert new flow sensor if necessary.
(See chap. 7.3)
1
2