Operating instructions Starterset Z LED 60 Set
Status 19.01.2021
(TNR: 33700066 / 33700067)
GERA Leuchten GmbH
7. Connecting the control unit to a Zigbee hub (smart home)
Note:
This function can only be carried out if the devices have previously been reset to the
factory settings. The remote control can then be reconnected to the control unit if it
should continue to be used.
(1)
Reset the control unit to the factory settings.
Press the learning button on the control unit 5 times in quick succession, or switch
the device off and on again 5 times in quick succession (switching the mains voltage
of the converter 230 V).
Note:
- If the device has already been reset, it will not respond when you reset it again.
- All affiliations to networks and settings are deleted.
(2)
Put the Zigbee Hub in search mode. To do this, follow the instructions for the corresponding
device or APP.
(3)
Switch the control unit off for
3 seconds
(switch on the 230 V mains voltage of the
converter) and then on again, the lighting flashes slowly
twice
.
Search mode lasts for 15 seconds. If the connection failed, try put the device in
search mode again.
(4)
The connected lighting unit flashes 5 times and then lights up continuously. Now
the device appears in the user interface (APP) of the Zigbee Hub.
