2.2 Replacing the Silica Gel Bag
If you open the camera lid, you must replace the original silica gel bag with a new one.
1. Loosen the screws holding the camera’s lid with a screwdriver.
2. Open the camera’s lid and you will find a silica gel bag attached to the interior of the lid.
3. Remove the silica bag and place a new bag back to its original position.
4. Fasten the camera’s lid within 2 minutes of replacing the silica gel bag.
IMPORTANT:
The silica gel loses its effectiveness when the dry camera is opened. To
prevent the lens from fogging up, replace the silica gel bag every time you open the
camera and conceal the gel bag in the camera within two minutes of exposing to the open
air.
6
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
