4
Accessing the Camera
4.
Select
Static IP address
. Type the IP Address, Subnet Mask, Router/Gateway, Primary
DNS and Secondary DNS.
5. Click
Apply
. GV-TM0100 is now accessible by entering the assigned IP address on the
web browser.
Important:
1.
If
Dynamic IP Address
or
PPPoE
is enabled, you need to know which IP address the
camera will get from the DHCP server or ISP to log in. If your camera in installed in a
LAN, use the GV-IP Device Utility to look up its current dynamic address. See
Checking the Dynamic IP Address
, Chapter 2,
GV-TM0100 User’s Manual
.
If your GV-TM0100 uses a public dynamic IP address, via PPPoE, use the Dynamic
DNS service to obtain a domain name linked to the camera’s changing IP address
first. For details on Dynamic DNS Server settings, see
Advanced TCP/IP
, Chapter 4,
GV-TM0100 User’s Manual.
2.
If
Dynamic IP Address
and
PPPoE
is enabled and you cannot access the unit, you
may have to reset it to the factory default settings and then perform the network
settings again. Refer to section 7 to see how to restore to factory default settings.
13
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
