manualshive.com logo in svg

GeoVision GV-Hybrid LPR Camera 10R, User Manual, Page: 79 / 146

Share
Download
GeoVision GV-Hybrid LPR Camera 10R User Manual Download Page 79

 

Administrator Mode

 

 

71 

4

4.4  Recording Schedule 

Note this function is not available for 

GV-Hybrid LPR Camera 10R

. 

 

The schedule is provided to activate recording on a specific time each day. 

 

Important: 

This function is currently not supported in GV-IP LPR Camera 5R. 

 

 

4.4.1   Recording Schedule Settings 

You can set the schedule for recording. 

 

 

Figure 4-17 

 

 

Span 1- Span 3: 

Set a different recording mode for each time frame during the day. Each 

day can be divided into 3 time frames, represented by Span 1 to Span 3.

 

 

Weekend: 

Enable this option to start monitoring all day on the weekend and select the 

recording mode to be used. Define whether your weekend includes 

Saturday and 

Sunday

 or 

Only Sunday

.

 

 

Special Day: 

Set the recording mode on a specified day.

 

Summary of Contents for GV-Hybrid LPR Camera 10R



















































































































































Reviews:

No comments