manualshive.com logo in svg

GeoVision GV-Hybrid LPR Camera 10R, User Manual, Page: 105 / 146

Share
Download
GeoVision GV-Hybrid LPR Camera 10R User Manual Download Page 105

 

Advanced Applications

 

 

97 

5

5.1.2    Using the GV-IP Device Utility 

The GV-IP Device Utility provides a direct way to upgrade the firmware to multiple GV-Hybrid 

LPR Camera 10R / GV-IP LPR Camera 5R. Note the computer used to upgrade firmware 

must be under the same network with the cameras. 

 

1.  Insert the Software DVD, select 

GV IP Device Utility

, and

 

follow the onscreen instructions 

to install the program. 

2. Double-click 

the 

GV IP Device Utility 

icon created on your desktop. This dialog box 

appears. 

 

Figure 5-2   

3. Click 

the 

Search

 button to locate the IP devices on the LAN or click the 

New 

button and 

assign the IP address to locate a GV-Hybrid LPR Camera 10R / GV-IP LPR Camera 5R 

on the network. Or highlight one IP device in the list and click the 

Delete 

button to remove 

it.  

Summary of Contents for GV-Hybrid LPR Camera 10R



















































































































































Reviews:

No comments