manualshive.com logo in svg

GeoVision GV-Hybrid LPR Camera 10R, User Manual, Page: 73 / 146

Share
Download
GeoVision GV-Hybrid LPR Camera 10R User Manual Download Page 73

 

Administrator Mode

 

 

65 

4

4.2.6 

GV-Video Gateway / GV-Recording Server 

The GV-Video Gateway and GV-Recording Server are video streaming servers designed for 

large-scale video surveillance deployments. The GV-Video Gateway / GV-Recording Server 

(with recording capability) can receive up to 128 channels from various IP video devices, and 

distribute up to 300 channels to its clients. With the GV-Video Gateway / GV-Recording 

Server, the desired frame rate can be ensured while the CPU loading and bandwidth usage of 

the IP video devices are significantly reduced. 

 

The GV-Hybrid LPR Camera 10R / GV-IP LPR Camera 5R can be connected with up to two 

GV-Video Gateway / GV-Recording Server. To send the video images to the GV-Video 

Gateway or GV-Recording Server, you must already have an account on each of the 

GV-Video Gateway / GV-Recording Server with the user name and password specified 

below. 

 

 

Figure 4-13 

Summary of Contents for GV-Hybrid LPR Camera 10R



















































































































































Reviews:

No comments