manualshive.com logo in svg

GeoVision GV-Hybrid LPR Camera 10R, User Manual, Page: 40 / 146

Share
Download
GeoVision GV-Hybrid LPR Camera 10R User Manual Download Page 40

 

 

32

3.2    The Control Panel of the Live View Window 

To open the control panel of the Live View window, click the arrow button on top of the viewer. 

You can access the following functions by using the right and left arrow buttons on the control 

panel. 

 

Click the this arrow button 
to open the control panel

Arrow buttons

Click the this button to select 
from a drop-down menu

 

Figure 3-3 

 

[Information]

 Displays the version of the GV-Hybrid LPR Camera 10R / GV-IP LPR Camera 

5R, local time of the local computer, time of the camera, the number of users logging in to the 

camera and the OCX registration path. 

[Video] 

Displays the current video codec, resolution and data rate. 

[Audio] 

Displays the audio data rates when the microphone and speaker devices are 

enabled. 

[Alarm Notify] 

Displays the captured images by motion detection. For this function to work, 

you must configure the Alarm Notify settings first. See 

3.6 Alarm Notification

. 

Summary of Contents for GV-Hybrid LPR Camera 10R



















































































































































Reviews:

No comments