GeoVision GV-FD8700-FR User Manual Download Page 79

Page: 79 / 106

Face Recongition

Fill out the following information:

Figure 5-10



Name:

Type a desired name for the person.



Organization:

Type a desired organization name for the person.



Group:

Select from a list of three groups in which the person shall be categorized

under. The three groups include

VIP

Normal

Unwelcomed

. To add more groups,

see [Group Management],

5.6.1 Settings



Note:

Type any additional remarks.



Browse:

Click to add portrait photos or snapshots, as face recognition data, for the

person. Make sure the photos meet all the requirements as specified in

5.5.1 Photo

Requirements

4. Click

Save

to save the face data. If the photos selected don’t meet the required criteria,

an error

message will appear.

5. To

add photos to or edit an existing profile, click the

Edit Record

icon

in Figure 5-9.

Summary of Contents for GV-FD8700-FR











































































































Search results

Summary of Contents for GV-FD8700-FR

Reviews:

GeoVision GV-FD8700-FR, User Manual, Page: 79 / 106

Search results

Summary of Contents for GV-FD8700-FR

Reviews: