GeoVision GV-FD8700-FR User Manual Download Page 19

Page: 19 / 106

Getting Started

No. Name

Description

1 LED

Indicators

(top) turns on when the power is on and

The power LED

turns off when there is no power supply. The status LED

(bottom) turns on when the system operates normally and

turns off when an error occurs.

2 Audio

Out

Currently not functional.

3 Line

e for audio input.

rnal

Connects to a microphon

Note:

This interface only works with an exte

microphone with power supply.

LAN / PoE

r PoE.

Connects to a 10/100 Ethernet o

DC 12V

Connects to power.

Rotational Screw

camera.

Loosens to rotate the

7 Conduit

Connector

0-FR.

Waterproofs the Ethernet cable

Note:

Not available for GV-FD870

8 Default

Button

ngs. For details,

Resets the camera to factory default setti

see

7.2 Restoring to Factory Default Settings

Focus Screw

Adjusts the focus of the camera.

Zoom Screw

Zoom the camera in or out.

Tilt Screw

Loosens the screw to tilt the camera.

12 I/O

Connector

1.6 I/O

Connects to I/O devices. For details, s

Connectors

Built-in Microphone

built-in microphone to record sound. For

Connectors

Connects to a

details, see

1.5 Connecting the Camera

Note:

Not available for GV-FD8700-FR.

14 Conduit

Connector

FR.

Waterproofs the audio / I/O wires.

Note:

Not available for GV-FD8700-

Memory Card Slot

XC/UHS

I, Class

10) to store recording data.

Contains a micro-SD card (SD/SDHC/SD

Summary of Contents for GV-FD8700-FR











































































































Search results

Summary of Contents for GV-FD8700-FR

Reviews:

GeoVision GV-FD8700-FR, User Manual, Page: 19 / 106

Search results

Summary of Contents for GV-FD8700-FR

Reviews: