4.5.2 Power Connection
There are two ways to supply power to the camera:
Use a Power over Ethernet (PoE) adapter to connect the camera to
the network, and the power will be provided at the same time.
Plug the power adapter to the 12V terminal block as shown below.
The power adapter is an optional device. For detail, see
Options
in
the manual.
1.
Insert the black wire of the data cable to the left pin (-) and the
red wire to the right pin (+).
+
-
Figure 4-8
2.
Connect the DC 12V power adapter to the terminal block.
DC 12V Power Adaptor
Terminal Block
Figure 4-9
76
