22
3.3 Extended Device
In the left menu, click
Extended Reader Configuration
to define the readers connected to
the controller through RS-485 or network connection.
Figure 3-12
[GV-Reader / CR420 / GF1921 / 1922 / CR1320 / FR2020 Function]
Define the readers
connected to the controller, and then use the
Function
drop-down list to select the door
associated with the reader.
GV-RK1352 / R1352 / DFR1352:
Select the
RS-485
checkbox and type the
Serial
Number
of the reader. The ID number located next to the serial number field will be
assigned to the reader.
GV-Reader 1251 / Reader 1352 V2:
Select the
RS-485
checkbox and leave the serial
number field blank. Note that the ID number located next to the serial number field needs
to match the reader’s ID number defined by the dip switches on the reader.
GV-GF1921 / GF1922 / CR1320 / FR2020:
Type the
MAC address
of the fingerprint
reader or camera and do not select the RS-485 checkbox.
GV-CR420:
Select the
RS-485
checkbox only if the GV-CR420 is connected to the
controller through RS-485 connection. If the reader is using network connection, do not
check the RS485 box. Type the
MAC address
of GV-CR420 if you using the latest GV-
CR420 firmware.
[ASManager Server IP Address]
To allow GV-ASManager to receive data from the GV-
AS1620, type the IP address and port of the GV-ASManager’s Server.
Click
Submit
. If the reader is detected, the
Connection Status
field will be green.