12
5. The
Enable hardware-compressed data FIFO
option is disabled by default. When the
option is enabled, the hardware-compressed data from the video IP device, such as IP
camera, video server and compact DVR, will be transmitted directly to remote servers
instead of being compressed again on the DVR. The remote servers include CMS-related
servers and WebCam Server. This feature can decrease the system load of DVR but
increase that of remote servers.
6. To use standard H.264 codec in recording, enable
Standard codec
in the Recording
codec format section.
7. To apply the same setting to all cameras, click the
Finger
button in each section.
8. To access the frame rate settings, on the Main System, click the
Configure
button, select
System Configure
, and select
Camera Configure
. This dialog box appears.
Figure 1-6
9. In the Rec Control section, click the
Arrow
button. The Hardware Rec. Frame Rate
Setting dialog box appears.
10. Set the maximum frame rate for motion and non-motion periods to save disk space when
possible.
