GeoRef V2 Series Hardware Operating Instructions
32
3.
Click the
Explore
button of Microsoft ActiveSync to open R2 series resource browser.
Copy the latest version firmware file to “Storage Card”.
4.
In the power off status, keep pressing the “ESC” button and press the power button,
the handheld will turn on and the interface of “Updating the firmware, please wait…”
will be shown as below. Then the handheld will be upgraded to the latest version of
firmware in Micro SD card.
Method 2:
You can also insert the Micro SD card into Micro SD card reader, and then insert the reader
to the USB interface of a PC. Copy the firmware file to the Micro SD card, and insert it into
handheld. Then by the above method, you can also complete grading firmware.
Note:
If there are several versions of the firmware for the correct type of handheld, the
system will be upgraded to the latest one. Also please make sure there are no other kinds of
firmware for different types of handheld such as V2 series and R2 series, or the system will
mistake them.
Summary of Contents for GeoRef V2E
Page 2: ......
Page 4: ......
Page 45: ...39 Troubleshooting Common Troubleshooting ActiveSync Common Problems C H AP T E R 6...
