GEOSOFT DENT ENDOEST-3D, User Manual, Page: 5 / 48

5
ENDOEST-3D
hotline @ geosoft.ru
! Avoid any liquid ingress into the device case.
!
Do not use the device close to inflammables. The device is not
operational in the presence of inflammable anesthetic mixtures with
air, oxygen or nitrogen oxides.
! Use only sterile and disinfected device components. The device
should be sterilized and disinfected directly before the first device use
and also after each patient in order to avoid cross infection
(for more
details see part 8“The device sterilization and disinfection”).
! Use cofferdam when working in patient’s oral cavity.
! Do not damage the cable “Signal line”. To avoid cable rupture at the
time of use, disconnect the cable from the control unit, keeping only
the isolating part of the cable plug. Don’t pull out the cable from the
control unit in any case.
! In some cases the apexlocator indications may be not enough
accurate and reliable (see part 6 “ The fundamental operating
instructions of the apexlocator”). Before the electronic apexlocator
use, it is recommended to make an X-ray and base on the information
from both methods.
! In the case of final diagnosing, the results of examination may serve
to be a guide mark for a dentist as the diagnosis of tooth pulp clinical
state (EOD) is based on average data. To set final diagnosis, use the
results of EOD together with anamnesis data, patient examination with
additional diagnostic methods.
! The device requires special safety precautions with regard to
electromagnetic compatibility (EMC), and the EMC information