11
V1.0
5.0 INSTALLATION
The following sections describe some typical installation procedures for
Geosense
®
Wi-SOS 100
This section of the manual is intended for all users of
Geosense
®
Wi-SOS 100
and is
intended to provide guidance with respect to their installation.
Please refer to the manual for each sensor being used in conjunction with the Wi-SOS
100.
It is VITAL that personnel responsible for the installation and use of the Geosense
®
Wi-SOS 100 READS and UNDERSTANDS the manual, prior to working with the
equipment.
**********
As stated before, it is vital to check all the equipment in the
shipment soon after taking delivery and well before
installation is to be carried out. Check that all components
that are detailed on the shipping documents are included.
5.1 Installation- Geosense
®
Wi-SOS 100 Wiring details
During installation the following wiring procedure should be observed. If the client
chooses to use their own specified cable the colour system should be ignored and
the letter designation should be followed only.
Geosense
®
Wi-SOS 100
nodes
normally come ready wired to the sensor required
but in the event they are supplied separately the following wiring should be used.
Colour Description
Red
15 v output from
Geosense
®
Wi-SOS 100
Green
Ground
Blue
Return from sensor
V
+
S
G
