background image

                                                                                                  15                                                                            

  

V1.0 

 

5.5 Logging in to Geosense

®

 sensor platform 

 
1.) Go to 

https://www.outpostcentral.com/

english/login.aspx 

and enter your username 

and password provided via email. 

5.4 Failure to connect 
 
If the unit fails to connect it may be due to the following:- 
 
       A.) Insufficient Signal strength

 

 
 

Move the unit to a higher or more open location. 

 
 

B.) Temporary GPRS network problem

 

 

 

 The 

Geosense

®

 Wi-SOS 100 

uses GSM to upload its data, therefore by using a 

mobile phone you can check that you are in an adequate reception area. 

 
 

C.) Damaged Geosense

®

 Wi-SOS 100 unit.

 

 
 

The unit has been damaged since last used. Check connections to sensors have not 
mistakenly fed high voltages in the device. 

 

 

ONCE THE UNIT AND SENSOR HAS BEEN 

INSTALLED PLEASE CONTACT GEOSENSE ON +44(0) 1359 270457 TO ALLOW 

UNIT TO BE VIEWED ON THE WEBSITE. 

 

 
2.) You will now be logged into your Geosense 
sensor platform account. From this page you 
will be able to view and manage all of your 
nodes. 
 

Summary of Contents for Wi-SOS 100























Reviews: