16
V1.1 May 2021
6.2.3 ADD SENSOR CONT.
With the appropriate sensor type selected, fill in the relevant factors and choose engineering
units (if required). Then press
‘
Add Sensor
’.
A validation check will be made to make sure
sensor has a reference name and valid calibration factors.
When a sensor is added, the app will automatically go to the select sensor screen.
6.2.4 SELECT SENSOR
At the top of the select sensor screen there is a searchable select box displaying a list of
sensors currently configured on the aap. Select the sensor currently connected to the
NexusGEO
and hold down the
‘
Hold To Take Reading
’
button for 1 second.
Note: Holding down the
‘
Hold To Take Reading
’
will give the user haptic feedback. This can
be turned off in the app settings.
The screen will change to show:
When adding sensors, some sensor types will add more than one
sensor into the app. This is because analogue connections can only
read from one sensor at a time, and so for instance with a biaxial
tiltmeter, a sensor will be added for each axis (A and B).
