Geosense NexusGEO, Instruction Manual

Page: 14 / 26

14
V1.1 May 2021
6.2.3 ADD SENSOR
Press ‘ Add Sensor ’ and the screen will change to:
The NexusGEO supports a wide range of sensors types, and each one has different
calibration factors that can be configured to convert to engineering units. Please refer to the
following table to the select the appropriate sensor type.
Sensor Type Calibration Factors Reading Units Engineering Units
4 - 20mA 3 Wire Sensor None mA None
4 - 20mA Crack Meter
Linear (K)
Polynomial (A, B)
mA Mm
4 - 20mA Piezometer
Linear (K)
Polynomial (A, B)
mA kPa, Bar, PSI, mH20
4 - 20mA Transducer
Linear (K)
Polynomial (A, B)
mA kPa, Bar, PSI, mH20
Inclinometer
(Analogue)
Linear (M, C)
Polynomial (A, B, C, D)
mA Sin(X), Degrees, mm/M, Radians
Inclinometer (Digital) None Sin(X) Degrees, mm/M, Radians