V1.1
MEMS Digital Portable Horizontal Inclinometer
09/02/2022
19
7.3. Battery Charging
Whilst the Reel and ASD have long battery lives, fully charging the equipment prior
to visiting site is strongly recommended.
As with most handheld equipment, the ASD can be easily charged using most USB
chargers and power banks. However, the reel requires a mains 100 - 250 VAC
supply.
1)
Remove the ASD, USB cable and charger from the hard case. Connect to the
Micro USB connector to the ASD and the Standard USB plug to the charger.
2)
The charger is supplied with various mains plug adaptors. Select and fit the
adaptor appropriate to the available mains electrical sockets.
3)
Connect the charger to a mains electrical supply, switch it on and allow the
ASD to charge fully.
4)
Remove the cable reel from its soft case and also remove the reel charger
from the pocket in the front case flap. (Figure 11)
Figure 11: Charger location in front section of carry case
