6
5
how to Use
This product is for household use only.
GETTING STARTED
• Remove all packing material and any stickers.
• Remove and save literature.
• Wash removable parts as instructed in CARE AND CLEANING section of this manual.
• Wipe grill plates and griddle plate with a damp cloth or sponge to remove any dust.
Wipe dry with a soft cloth or paper towels.
• Select location where unit is to be used, leaving enough space between back of unit
and wall to allow heat to flow without damage to cabinets and walls.
ATTAChING ThE GRILL PLATES
Important: This appliance should always be used with 2 grill plates securely attached.
Caution: Attach all grill plates when the appliance is cool.
Basic Grill Plates
Securely attach the top and bottom grill plates of the appliance using the release handles
on each side of the plates.
Note:
When using these grill plates, use the bar at the rear of the grill to lift the back of
the bottom grill plate to have the drippings run into the drip tray (see plate position A on
page 4).
Important: This position should only be used when grilling.
Important: When attaching the grill plates, be sure they are securely attached using the
release handles on each side of the plates.
Attaching the bake pan
Important: When using this plate, make sure the appliance is in the completely
horizontal position (see plate position B on page 4).
1. If using the baking pan, securely attach the top grilling plate and baking pan using the
release handles on each side of the plates.
DRIP TRAY
Place the drip tray under the front sloped section of the bottom plate on the grill.
PREhEATING ThE GRILL
1. Close cover on grill.
2. Unwind cord and plug into standard electrical outlet.
3. Set variable temperature control dial to desired grill setting to begin preheating. See
SUGGESTED GRILLING CHART for recommended temperature settings.
4. Set timer between 7 – 10 minutes to preheat at desired temperature.
Note:
When setting timer, always turn the dial past 10 and then turn back or forward to
desired setting.
5. The power light (red) comes on to indicate that the elements are heating. When the
appliance is preheated the ready light (green) will turn on.
Note:
When set temperature is reach, both the red power light and green ready light will
illuminate. When the timer elapses to zero (0), both lights will go out.
GRILLING
1. Using a pot holder, carefully open the preheated grill.
2. Before first use, lightly oil grill plates, if desired.
Note:
Aerosol cooking spray should not be used on nonstick surface. Chemicals that
allow spray to come out of can build up on surface of grill plates and reduce their
efficiency.
3. Carefully place foods to be cooked on lower grilling plate. Close lid.
Note:
Do not overload grill.
4. Once food is placed on grill, set timer to desired cooking time.
Note:
Use suggested cooking times found in the GRILLING CHART on page 7.
Important: Do not leave the appliance unattended during use.
5. After selected time, the food should be done.
6. Using a pot holder, carefully open the grill cover.
7. Remove cooked food using plastic spatula provided.
Note:
Always use heatproof plastic, nylon or wood utensils to avoid scratching nonstick
surface of grill plates. Never use metal skewers, tongs, forks or knives.
8. When finished cooking, turn the dial to the LOW setting and unplug the appliance.
Important: heat continues to be ON until grill is unplugged.
Warning: Do not remove grill plates while grill is still hot! Allow grill to cool completely
before removing or changing plates.
9. Allow drip tray to cool before removing it from under grill. Wash and dry drip tray after
each use.
Note:
Be sure the liquid in drip tray has cooled before attempting to move it.