George Foreman GFGBBQ4BW, Manual

Page: 24 / 34

Warning: Always test gas line for leaks at connector with
soap water around all connections.
ATTACHING YOUR GAS CYLINDER
After purchasing your gas cylinder you will then be ready to set it up with
your gas grill.
When changing the gas cylinder it must not be near any
source of ignition .
Position the gas cylinder at the left side of your gas grill, keeping in mind
that the bottle must be kept away from heat and in a safe position.
•
When ready to use your gas grill place the regulator onto the gas bottle
valve and push down firmly until you hear it click in to place.
•
Attach the hose to the regulator gas outlet, you will need to push firmly
as it is a tight fit.
•
Once the hose is connected to regulator it must be secured in place
using one of the two jubilee clips supplied.
•
Attach the other end of the gas hose to the gas inlet on the appliance,
again you will need to push firmly as it is a tight fit.
•
Once the hose is connected use the second jubilee clip to secure in
place.
•
Ensure that the hose is not subjected to twisting which will affect the
gas flow when installing your gas grill. Also the hose must not have
undue tension and must not touch any part of the gas grill which may
be hot.
•
Once the gas cylinder is connected to the appliance you can then start
the flow of gas by turning the small lever on the regulator from its
closed position (horizontal) to its open position (vertical).
24