Georg Fischer RA 21, Operating Instructions Manual

Page: 6 / 28

2
GEORG FISCHER +GF+¹
1 Notes on safety
The RA 21/RA 21 Special Pipe Cutting and
Bevelling Machine (referred to as a pipe cutter
in the following) is a state-of-the-art machine.
Using it for purposes other than those described
in this manual may cause injury to the user or to
others. It may also damage the machine or
other equipment.
Therefore:
º Always ensure that the machine is in good
working order and always comply with
these notes on safety.
Proper use
º Only use the materials and types of pipe
specified in this manual (see chapter 3).
Always consult Georg Fischer after-sales
service personnel before using other
materials.
º Only use the pipe cutter for cutting and
bevelling operations as described in
chapter 6.
º Only use original Georg Fischer spare parts
and auxiliaries.
º Inspect the pipe cutter every day for visible
signs of damage or defects. Any damage or
defects must be repaired immediately.
Work on the electrical installations may only
be performed by a qualified electrician.
º Do not use the pipe cutter unless all safety
devises
- restart inhibitor
- overload protection
- saw blade guard
are working properly and the fixtures on the
vise and baseplate are fitted securely.