29
• OPT: Data may be entered or skipped, depending on availability
of the information and user preference using the keypad or by
scanning a barcode (Interleaved 2/5 format).
• NO: During the fusion process sequence, the machine will not
ask for operator identity (the related menu will not appear in
the process sequence).
• FREE: Operator ID can be any number alpha/numeric
characters from 1 to 20 characters. ID can be input manually
using the keypad or by scanning a barcode (Code 128 format).
This setting does not require an Operator ID to be entered and
can be bypassed if the user desires.
3.6.2 JOB NUMBER:
• YES: Insertion of a Job Number (code, worksite, etc...) is
required for the process sequence to proceed. Data can be
entered manually using the keypad or by scanning a barcode
(Code 128 format).
• OPT: Optional, a job number can be entered or this section can
be bypassed if the user desires.
• NO: During the fusion pocess sequence, the machine will not
ask for a job number to be entered.
Select the mode by using the (
▲
)(
▼
) buttons and press START/OK
(I) to confirm the setting. To cancel the operation press STOP/ESC
(O).
3.7 MEMORY MANAGEMENT
The fusion protocols are
stored in the processors
internal memory. The MEMORY
MANAGEMENT menu allows the
user to select how to proceed
when the memory is full:
Summary of Contents for MSA 340
Page 44: ...44 ...
