Georator Triathlon III T3UPS-13-15K, Instruction Manual

Page: 87 / 98

Menu 13 S E R I A L N U M B E R
1 2 3 4 5 6 7 8
Menu 13 is accessed when SERIAL NUMBER is selected from Menu 10. In
this menu, the serial number of the UPS, to which the dialing unit is
connected, is entered. The total number of digits should not be more than
eight. The entry method is identical to that specified in Menu 11.
Menu 14
D I A L T I M E S
1
Menu 14 is accessed when DIAL TIMES is selected from Menu 10. In this
menu, the number of redials for each specified phone number, is entered.
The maximum number is nine. The entry method is identical to that
specified in Menu 11.
The LIST SETTING option in Menu 10 can be selected to review the
parameters that have been set.
(C) Parameter Setting Procedure
To prevent damage, please follow the procedures below for the initial setup,
or revision, of parameters revision of the UPSCALL module.
1. Open the cover of the DIALING UNIT, locate the 8 pin EEPROM, and
remove it. Plug this component into the 8 pin EEPROM socket on the
EEPROM BOARD, as shown below.
2. Cut off the power supply of the RECEIVING MASTER.
DB9 Port
8PIN EEP ROM
Socket
6