Geonav 4 gipsy, User And Installation Manual

Page: 72 / 91

6 9
English
FUNCTIONAL CHARACTERISTICS
This chapter describes some of the most important functions
of the GEONAV, as well as the terms most commonly used in
this document.
Switching on/Switching off the unit
To switch the GEONAV on, keep the
PWR
key pressed until
the unit issues a beep sound to confirm the operation. To
switch the GEONAV off, keep the
PWR key pressed for more
than 1 second.
Selecting the marine or land mode
At start-up, the mode enabled is that active when switching
the unit off. To switch from marine navigation to road naviga-
tion, make sure that the cartridge storing the desired data
(marine or land) has been loaded, then select SETUP, NAVI-
GATION or MARINE NAVIGATOR.
NOTE: If the cartridge currently inserted contains no road maps, as soon as the CAR
NAVIGATION option is selected, the unit will automatically turn off after showing a
warning message. At the following power on, the unit will start in marine navigation
mode.
Voice instructions
As mentioned in the introductory chapter, in compliance with
the safety regulations, the car navigator helps the user to fol-
low the itinerary defined thanks to voice instructions. The
power cord includes a speaker with adjustable volume and a
jack for the external GPS powered by this cord.
The instructions and information provided by the speaker
concern:
•
Entrance/exit ramps of highways, bridges, forks, traffic
circles and services.
• Automatic recalculation of the route in case of diversion
from the planned route.
Functional Characteristics