Geonav 4 gipsy, User And Installation Manual

Page: 16 / 91

13
English
CARTRIDGE INSTALLATION
Installing the CompactFlash™
Make sure that the unit is switched off and perfectly dry.
Remove the cartridge slot cover located on the unit’s rear side.
Insert the cartridge into the appropriate slot, with the label
side backwards and push it.
Replace the cover and check that it is perfectly closed, in
order to avoid any water infiltration.
WARNING: Always use CompactFlash™ cartridges certified by Navionics. The
use of non-certified cartridges may result in improper operation of the unit.
The CompactFlash™ cartridges can be used as a mass-storage
with any PC computer, so can be the cartridge used by the
plotter. However, the plotter needs to find some free space in
the cartridge in order to work properly. Prior to use a new
cartridge, always make sure that there are at least 2.5MB of
free space.
WARNING: Be careful when handling the cartridge files by using the PC. Microsoft
Windows allows deleting and moving files easily, therefore avoid erasing the files
from the directories present in the cartridge. Damaging the files stored in such direc-
tories may result in loss of data or improper operation of the unit.
Cartridge Installation