background image

Deleting videos
You have the option of deleting the videos made direct from the camera. To delete the last video
made, press on the MENU button as many times as necessary to turn on the icon 

. Confirm by

pressing on ENTER.
Repeat those operations to delete several videos.

To delete all videos at once, press on the MENU button as many times as is required to obtain the
icon 

. Confirm by pressing on ENTER

Note: It could take several minutes to delete all the videos if there has been a lot of recording.

Adjusting the time and date
Press on the MENU button as many times as required to obtain the DATE icon 

. When this flashes,

press on ENTER in order to change the date and time.

Adjusting the year: 
Keep pressing on the Video start button to adjust the final figure of the year
Press on ENTER to validate
Afterwards keep pressing on the Video start button to adjust the third figure of the year.
Press on ENTER to validate the year.

Adjusting the month: 
The symbol M is shown
Keep pressing on the video start button to adjust the month.
Press on ENTER to validate

Repeat the same process to adjust the hour and minutes.

INFORMATION CONCERNING THE FCC 

This camera complies with section 15 of the FCC Regulation.
Its operation is subject to the two following conditions :

1 This camera has no risk of producing harmful interference.
2 This camera must accept all interference which occurs, including those which risk producing an

undesirable functioning.

This equipment has been tested and certified as complying with the limits of Class B numerical 
apparatus, under the provisions of Section 15 of the FCC. Those limitations are imposed to ensure
reasonable protection against intrusive interference within a residential installation. This equipment
generates, uses and emits radio energy frequencies and, if it has not been installed in accordance
with the instructions, could provoke harmful interference to radio communications. However, there
is no guarantee that it will produce no interference in any particular installation. If this equipment 
provokes intrusive interference with radio or television reception, interference which can be 
ascertained by the camera off and then switching it on again, it is recommended that the user take
one of the following measures to remedy such interferences:
- Reorientate or move the reception antenna.
- Increase the distance between the apparatus and the receiver.
- Link the equipment to a power supply on a circuit other than the one to which the receiver is 

linked.

- Seek advice from the vendor or from a radio/television technician.

20

2-10732 - X Snipe - FR-ENp4-21:Notice - 10732 X Snipe  25/07/07  14:43  Page 20

Summary of Contents for X-SNIPE 300












Reviews: