In the "cardio" function, if the heart rate displayed is higher than the upper limit of
the target zone, the display indicates this with the following symbol (fig a.). If it is
lower than the lower limit, the symbol displayed is the one in figure b.
If the passing alarm is activated (ON), the watch will emit 1 beep every 6 seconds
if your heart rate is LOWER than the Target Zone.
ATTENTION :
In the settings mode, if no buttons are pressed for 2 to 3 minutes, the watch will return
automatically to cardio mode.
In the cardio mode, if no cardio signal is being received and if the buttons are not
pressed for 2 to 3 minutes, the watch will return automatically to time mode.
4 - Stopwatch mode (CHRONO)
S1 :
start stopwatch, intermediate time
S4 :
Reset to 0
S2 :
Stop stopwatch
S5 :
Electroluminescence
S3 :
Go to stopwatch mode
ATTENTION :
The following explanations as well as the diagrams on the screen assume that the user
is wearing the chest belt and is using the heart rate monitor function in parallel. If a
heart rate signal is received correctly by the watch, the symbol
"heart"
will flash in the
bottom line. If this is not the case, the display of the heart rate on the upper line remains
at - and no alarm will be triggered.
The stopwatch displays the minutes and seconds on the line in the middle and the
1/100 seconds on the upper line up to 59'59'', then the hours and minutes on the
middle line and the seconds on the upper line.
On the bottom line, the watch displays the current heart rate of the user.
22
S3
S5
S2
S4
S1
BPM
72
15
05
❤
1013
60
22:01
ACC 70
M
69
8:00
ON
T1
AL-1
3.70
LAP
2.49
ALTI
ALTI
DATA 02
((
•
))
12:30
03
1013
T1
WE 4
P
mBar
60
22:01
ACC 70
M
69
ALTI
ALTI
DATA 02
Fig. a
Fig. b
BPM
165
HI
❤
BPM
103
HI
❤
