•
Please read guidelines carefully before use. Retain these guidelines for as long
as you have the watch.
•
Do not manipulate the buttons under water, and do not go beyond the depth
indicated by the following table with the watch.
•
Do not subject the watch to extremes of temperature. If the watch is subjected to
direct sunlight for a long period, the display may darken temporarily, but will go back to
normal once the temperature has dropped again.
•
Clean the watch and the belt with a soft, damp cloth only. Do not use detergents
since they may damage the materials of your watch. Only the elastic of the belt
may be machine washed (30°).
CAUTION!!!
This device is designed for use in sports and leisure activities. This is not a medical
monitoring device. The information provided by this device or this booklet are
for information only and must not be used for monitoring a pathology except after
consultation with and the agreement of your physician.
Even athletes in good health must take into account that the determination of
your maximum heart rate and your personal training zone is a vital element in the
scheduling of effective, risk-free training.
The advice of your physician or health professional is recommended for
determining your maximum heart rate, your upper and lower cardiac limits and the
frequency and duration of exercise adjusted for your age, physical condition and
targeted results.
Finally, because of possible disturbances generated by the radio transmission
system, we do not recommend that persons who wear pacemakers use a heart
rate monitor utilizing this technology, like the CW600.T
Not taking these precautions may entail serious risk.
Wearing the chest belt.
The chest belt acts as a sensor
and emitter. It measures
the differences in potential
created on the surface
of the skin by the beating
of your heart. Then it sends
this information to the watch by radio signal.
The quality and precision of the measurements depends on correct positioning,
but also the comfort during practice.
As indicated in drawing 1, the sensors are the surfaces of black rubber on both
sides of the central part.
18
Measurement sensors
