Total Station Manual
33
2.4 EDM signal
The function of signal is to display the intensity of signal received by total
station.If the target is hard to be found or can’t see, using the function can achieve the
best sighting accuracy.
Steps
Key
Display
ƻ
1
After entering to the
interface
of
EDM
Setting,press the key of [F4]
to enter the second page of
soft key, then press te key of
[F2](Signal)
to
enter
the
function of Signal intensity.
[F4]
+
[F2]
ƻ
2 Using the bar chart and
value of number to show the
intensity of signal received by
total station in the screen. As
shown in the picture on the
right.
ƻ
3 Press [F1] or [ESC] to
back to the menu of EDM
setting.
[F1]
or
[ESC]
