Geomagic Sensable Phantom Omni, Device Manual

Page: 25 / 32

Omni Device Guide C-1
A
PPENDIX
C: R
EGULATORY
N
OTICES
Appendi x
Appendix C: Regulatory Notices
FCC Notice (U.S. Only)
The Phantom Omni® haptic device is classified by the Federal Communications
Commission (FCC) as a Class B digital device.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user's authority
to operate the equipment under FCC rules.
The following information is provided on the device covered in this document in
compliance with FCC regulations:
Product Name : Phantom Omni
Model Number : 02350
Company Name : Geomagic, Inc.
NOTES
Any changes or modifications to the hardware not expressly approved by Geomagic could
void the user's authority to operate this equipment.
This device is to be used with the Geomagic-supplied power supply only. Replacement
power supplies are available directly from Geomagic.