Geomagic Sensable Phantom Omni, Device Manual

Page: 15 / 32

Omni Device Guide 2-3
I
NSTALLING THE
P
HANTOM
O
MNI
D
EVICE
Connecting the Phantom Omni Device
b Plug the power supply into an available AC outlet. (For 110 V the AC outlet must
be rated for at least 2 Amps; for 220 V AC, at least 1 Amp).
The power cables connected to the back of the Omni device
.
c Connect the supplied FireWire cable into either of the two 6-pin FireWire ports
on the back of the Phantom Omni device.
d Connect the other end of the FireWire cable to the FireWire port on your
computer.
Warning Make sure the connector is facing in the correct orientation as shown
in the image above.
IMPORTANT
Sensable Technologies uses only FireWire components that meet or
exceed the IEEE 1394 implementation recommendations. Sensable
is not responsible for any damage that may result from using 3rd
party cables.