30
4.19 “N” - Display Next Measurement Cycle
Displays the next time the datalogger will initiate a measurement cycle. If the start time (
ST
command) has been set this command will display when logging will begin.
*ST10:48
Logging will start at: 10:48:00
*N
Next time to read: 10:48:00
*
4.20 “NA” - Display Network Address
Displays the current network address.
*NA
Network address: 1
*
When network recognition is enabled, this number (preceded by the # character) must be entered
for the respective datalogger to respond. The following example illustrates communication with
two different dataloggers on the RS-485 network.
<ENTER>
<ENTER>
#1<ENTER>
Network address: 1
*NA
Network address: 1
*E
<ENTER>
<ENTER>
#2<ENTER>
Network address: 2
*NA
Network address: 2
*E
4.21 “NAddd” - Set Network Address
Sets the current network address to any address between 1 and 256.
*NA10
Network address: 10
*
