TrueView 435 Hardware User Guide
31
TrueView 435 Hardware User Guide
10/26/2021
Figure 44
–
DJI Pilot, Obstacle Sensing Settings Menu
4.
Center of Gravity (GC) Calibration
IMPORTANT M300 Only
When heavy payloads are carried on the M300 platform a center of gravity (GC) calibration must be
performed there is any change to the payload. This would include if you switched from a TrueView 410
to a TrueView 435 or DJI P1 or even switch to flying without a payload. The aircraft must be in flight and
hovering to start the calibration. It is ideal to perform this calibration in a wind free environment. To
perform the GC calibration, perform the following steps:
1.
Launch the DJI Pilot application, open a mission, or go into the manual view.
2.
Tap the Ellipsis menu (…) on the top right corner of the screen.
3.
Stay within the Flight Controller Settings tab and scroll to the bottom of this screen.
4.
Tap the Center of Gravity Auto Calibration Button and follow the instructions. (Figure 45)