TrueView 435 Hardware User Guide
24
TrueView 435 Hardware User Guide
10/26/2021
CCFSection8
–
Camera
Figure 33 - Core Configuration
–
Camera
This section is applicable for CCU firmware v2.2.1 and later.
•
Set “CameraOperate” to
false
if you do not wish to use the cameras for a mission. For example, a
late evening flight.
•
If the
“CameraFileTransferWindDown”
is
true
, the TrueView is configured to operate in Standard
mode and the images will get transferred to the UMS drive during the wind-down sequence.
This
field is
true
by default and is recommended not to be changed
.
o
If it is
false
, the TrueView is configured to operate in Extended mode and the images will
not get transferred during wind-down and they will have to be manually downloaded from
each camera SD card and placed in the Camera 1 and Camera 2 folders in the cycle folder.
o
The image transfer process takes about 5 minutes for a 15 minutes flight. For aircraft that
can fly for extended periods of time (greater than 30 minutes of flight), it is recommended
to set this field to false, and transfer the images manually.
•
“CameraStorageFormat” and “CameraStorageFormatConfirm” are used to format the camera SD
cards. If both values are set to True, the TrueView system will format the camera SD cards the next
time the system is powered on. The TrueView system will set these value back to false after the
format is complete. If only one of these values is set to True, the format will not occur.