geo-FENNEL FL 270VA TRACKING, User Manual

Page: 38 / 88

38
EN
SLOPE MODE
Slopes can be set manually up to 5° (± 9 %).
Press button to enter the SLOPE function. The SLOPE LED is illuminated.
Press button once more to switch to the MAN function.
The MAN LED is illuminated.
Choose the relevant axis (X, Y, Z) by pressing button of the remote control.
SLOPE
Horizontal operation:
One axis (X or Y) can be set manually, the other axis is automatically self-levelled.
Vertical operation:
The direction of the X axis can be set manually, the Y axis is self-levelled.
In both horizontal and vertical operation the TILT and / or V-W-S function can be activated.
MAN
Horizontal operation:
In this mode both (X and / or Y) axes can be set manually.
Vertical operation:
Both (X and Z) axes can be set manually. In horizontal and vertical operation TILT and V-W-S cannot be
activated.
Press button to quit the SOPE / MAN mode.
After leaving the slope function the TILT function is not active. If required press button .