13
EN
E
SAFETY NOTES
INTENDED USE OF INSTRUMENT
Triangle, polygon and engineer measurements in the field of civil engineering as well as cadastral
survey.
CARE AND CLEANING
Handle measuring instruments with care. Clean with soft cloth only after any use. If necessary damp the
cloth with some water. If the instrument is wet clean and dry it carefully. Pack it up only if it is perfectly
dry. Transport in original container / case only.
SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS
Measurements through glass or plastic windows; dirty laser emitting windows; after the instrument has
been dropped or hit. Please check the accuracy.
Large fluctuation of temperature: If the instrument will be used in cold areas after it has been stored in
warm areas (or the other way round) please wait some minutes before carrying out measurements.
ELECTROMAGNETIC ACCEPTABILITY (EMC)
It cannot be completely excluded that this instrument will disturb other instruments (e.g. navigation sys
-
tems); will be disturbed by other instruments (e.g. intensive electromagnetic radiation nearby industrial
facilities or radio transmitters).
CE-CONFORMITY
The instrument has a CE mark according to EN 55011: 2007, EN 61000-6-1-2007.
WARRANTY
This product is warranted by the manufacturer to the original purchaser to be free from defects in mate
-
rial and workmanship under normal use for a period of two (2) years from the date of purchase. During
the warranty period, and upon proof of purchase, the product will be repaired or replaced (with the same
or similar model at manufacturers option), without charge for either parts or labour. In case of a defect
please contact the dealer where you originally purchased this product. The warranty will not apply to this
product if it has been misused, abused or altered. Without limiting the foregoing, leakage of the battery,
bending or dropping the unit are presumed to be defects resulting from misuse or abuse.
