background image

14

EN

SAFETY INSTRUCTIONS

 ·

Do not operate the laser without first reading and understanding all the safety and technical data in 

the user manual.

 ·

Do not stare into the laser beam or point it towards people or animals.

 ·

Do not aim the beam at reflective surfaces such as windows or mirrors as reflected beams can be 

dangerous.

 ·

The laser should only be operated by trained and qualified personnel. All users should be fully 

informed about the potential biological effects on the eyes and skin when using laser devices and be 

conversant with laser protection regulations - as per IEC 60825-1:2014.

 ·

Laser products should be restricted from persons under 18.

 ·

In the event of a class 3R laser beam hitting the eye immediately close your eyes and turn your head 

away from the beam.

 ·

Do not attempt to repair or adjust the laser device.

 ·

The emitted laser radiation is potentially dangerous to the eye.

 ·

The use of class 3R laser products may require registration with a local authority and the appoint

-

ment of a laser protection official.

 ·

Do not operate the laser without first reading and understanding all the safety and technical data in 

the user manual.

 ·

The user manual must always be kept with the instrument.

 ·

The instrument should be kept from unauthorized use.

 ·

Areas where these class 3R laser devices are being used should display the appropriate warning 

signs. This is to prevent unauthorized persons inadvertently entering the working area. If necessary, 

ensure that the laser working area is being guarded and/or shielded. The limitation of laser radiation 

in controlled areas avoids eye injuries to external persons.

 ·

The legal requirement for using class 3R laser product will vary from country to country. The user is 

responsible for compliance to national standards and regulations.

 ·

Non-observance may lead to injuries.

LASER CLASSIFICATION

(MODEL FET 402K-L only)

The instrument is a laser class 3R lroduct according to 

 

DIN IEC 60825-1:2014.

Please observe the instructions give above when using the

instrument. 

The instrument is marked with class 3R warning labels.

Laser 

3R

IEC 60825-1:2014

P ≤ 5 mW @ 635 - 670 nm

www.geo-fennel.de

Summary of Contents for FET 402K-L

















Reviews: