36
EN
RECEIVE A LASER BEAM
Power on the receiver and make all required settings (i. e. accuracy fine, sound high).
Carefully move the receiver up and down to detect the laser beam.
PLEASE NOTE:
If the distance between the rotating laser and the receiver is less than 1 m erroneous measurements
may occur.
Indication 1
The laser beam is high
„arrow“ is illuminated.
Acoustic signal:
Slow beep.
->Move the receiver up.
Indication 2
The laser beam is low
„arrow“ is illuminated.
Acoustic signal:
Fast beep.
->Move the receiver down.
Indication 3
The LED „0-position“
bar is illuminated.
Acoustic signal:
Continuous beep.
-> On level.
APPLICATION
Connect the clamp to the receiver for use with a laser pole, levelling staff or similar accessory.
For optimum accuracy always level the bubble vials on the receiver before taking measurements.
Summary of Contents for 211001
Page 21: ...21 DE...
Page 41: ...41 EN...
