Suspension
Lighting
Reflectors
Motor Drive Assembly and Throttle
o Ensure hub motor is spinning smoothly and the motor bearings are in good working order.
o Ensure all power cables on the bicycle are secured and undamaged.
o Make sure the hub motor axle bolts are secured and all torque arms and torque
washers are in place.
Battery Pack and Wiring
o Ensure battery is charged before use and securely locked into the frame.
o Ensure there is no damage to wiring or battery pack.
o
NOTICE:
Before
every
ride
,
it
is
important
to
carry
out
the
following
safety
checks.
Safety Checklist
Safety Check
Basic Steps
o Ensure there is no damage, binding or fluid leaks from shocks and fork.
o Ensure the Shock mounting bolts are secure and to torque specification
o Ensure the headlight is securely mounted and fully functional.
o Ensure the tailight is functional and brake light flashes when brake is applied.
o Ensure the reflectors are securely mounted to the chassis
o Ensure the reflectors are clean and free of damage
Racks, Fenders, Accessories and
Cargo.
o Ensure any racks, fenders, accessories and cargo are securely mounted to the chassis
o Ensure any racks, fenders, accessories and cargo are not in contact with moving components
of the bicycle such as wheels, handlebars, suspension, crank, etc.
Ensure wiring connections are interlocked and wiring is appropriately secured to the bicycle.
WARNING
Failure to perform
equipment
safety checks increases the chance of
vehicle failure which can
result in
serious injury or death
.
Be sure you
check your equipment before each ride.
1
8
